News
What are the differences between two-color tablet press and ordinary tablet press?
Release time:
2021-01-05 11:25
Source:
two-colortablet pressIt is to press two materials of different colors into one material, and the pressed materials will not interfere with each other. Due to the realization of two-color pressing, there are certain differences from ordinary tablet presses in many aspects, such:
1. Upper roller frame device
The upper cover of the two-color tablet press is an integrated casting. The groove is equipped with a pressure wheel, which is sleeved on the crankshaft. The mechanical rod is connected to the coil spring at the outer end of the shaft. The compression increases the distance between the upper and lower pressure wheels and reduces the pressure. Protect the safe use of the mold and the mold, adjust the pressure to rotate the flower handle to change the length of the spring, so that the pressure of the spring is sufficient.
2. Upper rail device
The guide plate is disc-shaped, and a heat-treated guide rail is embedded around it. The guide rail is fixed with screws. The groove at the tail of the upper punching hole extends along the convex edge of the guide rail, and the guide rail moves up and down.
3.35-hole turntable device
The turntable is an integral casting with 35 vertically evenly distributed die holes. The whole is set on a fixed vertical axis. The entire turntable fixes all punches and rotates clockwise.
4. Drive shaft with clutch device
The drive shaft of the two-color tablet press is installed horizontally in the bearing bracket. There is a worm in the middle, a test handwheel at the front end, a cone disc clutch at the rear end, a handle control switch and a parking space. The contact of the clutch passes through the coil spring. If the load of the machine exceeds the pressure of the spring, slippage will occur, so the machine will not be seriously damaged.
Key words:
Laboratory Equipment
Packaging Equipment
pharmaceutical equipment
Pharmaceutical machinery
Previous Page
Related News
Special equipment for efficient pressing of catalysts by catalyst tablet presses
The working principle of the catalyst tablet press is mainly based on powder compaction technology. By the action of high pressure, the catalyst raw material powder is filled into a mold, and a solid tablet having a certain shape and hardness is formed through a pressing process. In this process, the tablet press adjusts parameters such as pressure, speed and time through a precise control system to ensure the uniformity and stability of the pressed catalyst tablets.
Catalyst tablet press efficient production weapon for chemical industry
Catalyst tablet press, as an important equipment in the field of modern chemical industry, is specially used to compress catalyst raw material powder under high pressure to form catalyst tablets in solid shape. This equipment not only improves the production efficiency of the catalyst, but also has a profound impact on the production efficiency and environmental protection of the entire chemical industry.
Three-layer tablet press key equipment for pharmaceutical and chemical industry
The three-layer tablet press is an efficient and versatile pharmaceutical and chemical production equipment that can compress powdered materials into tablets or granules of various shapes and specifications. This kind of equipment is widely used in pharmaceutical, chemical, food and other industries, and is an indispensable part of the production process.
Three-layer tablet press assistant in the pharmaceutical and chemical industry
The three-layer tablet press is an efficient and versatile pharmaceutical and chemical production equipment that can compress powdered materials into tablets or granules of various shapes and specifications. The equipment in the pharmaceutical, chemical, food and other industries have a wide range of applications, become an indispensable tool in these industries.
Three-layer tablet press Production weapon for pharmaceutical and chemical industry
The three-layer tablet press is a highly efficient and versatile pharmaceutical and chemical production equipment that can compress powdered materials into tablets or granules of various shapes and specifications. This kind of equipment is widely used in pharmaceutical, chemical, food and other industries, and has become an important tool to improve production efficiency and ensure product quality.
Three-layer tablet press high-performance powder material pressing equipment
The three-layer tablet press is mainly composed of upper and lower tablet wheels, intermediate conveyor belts, and related metering, feeding and driving systems. During operation, the material is fed through an intermediate conveyor belt to be compressed between two tabletting wheels to form tablets or granules. The equipment adopts modular design, which is easy to install, debug and maintain. At the same time, it is equipped with advanced PLC programmable control system to realize automatic production.
Pharmaceutical machinery, pharmaceutical equipment, tablet press,rotary tablet press, high-speed tablet press
Welcome to know our products
Get more product service information
- All
- Product Management
- News
- Introduction
- Enterprise outlets
- FAQ
- Enterprise Video
- Enterprise Atlas
Contact Us
Address: Chenjia Town, Chongming, Shanghai
Telephone:021-59431285
Fax: 021-59432024
Mailbox:info@sthpm.com
yaoji_tianhe@126.com
Sales Network
Logistics services | We can customize different specifications and sizes of machines according to different requirements of customers