three-layer tablet pressUsed for pressing various granular raw materials into a disc shape, suitable for laboratory trial production or small batch production of various tablets, sugar tablets, calcium tablets, etc. The utility model relates to a small desktop electric (manual) continuous tablet press, which is equipped with a mold and can adjust the filling depth of the material and the thickness of the tablet. The function of the three-layer tablet press machine is to make powdered and granular raw materials into adaptable, easy to use, and easy to maintain. Tablets with adjustable tablet thickness are suitable for various Chinese and Western medicine preparations in the pharmaceutical industry and similar products in other industries. Tabletting is well received by users in various industries.

Installation and connection of three-layer tablet press, multifunctional tablet press, catalytic tablet press, high-speed tablet press, disinfection tablet press, tablet press.

1. The three-layer tablet press is installed on a solid wood workbench (it can also be installed on a cement workbench) and fixed with foot nails. The height of the worktable from the ground is about 600mm (manual operation, easy to operate). In order to facilitate disassembly and maintenance, a hole with a diameter of about 35mm should also be made on the corresponding stamping mandrel positioning part of the wooden workbench.

2. Please connect the ground wire to the motor before turning on the power to ensure information security. Remove the V-belt, turn on the working power of the motor, start the motor, and observe and analyze whether the motor can rotate in the correct direction (the rotation direction of the motor shaft should be opposite to the arrow direction on the protective cover or hand wheel). If there is no direction of rotation is wrong, please connect the wires separately, and then install the V-belt according.

Adjustment of loading and unloading of three-layer tablet press and tablet press, multifunctional tablet press, catalyst tablet press, high-speed tablet press, bacteria tablet press.

1. Install blunt head: tighten the loose blunt head fixing screw, turn the handwheel to lift the mandrel to a high position, insert the lower blunt head into the mandrel hole (note that the notch slope of the lower blunt head is aligned with the lower blunt head fixing screw and insert it into the end), and tighten the lower blunt head fixing screw.

2. Install the lower punch: loosen the upper punch fastening nut, insert the upper punch mandrel into the hole of the upper punch mandrel, insert it into the bottom end, clamp the lower hexagon punch mandrel with a wrench, and tighten the upper punch fastening nut.

3. Install a mold: loosen the fixing screws in the control mold, place the mold flat into the hole of the inner plate of the mold, and at the same time make the hole into the mold. After pressing to the bottom, fix the enterprise and tighten the screws in the mold. When placing the middle die, pay attention to make the middle die flat, so as to avoid the tilt, which can be stuck when placing and damage the hole wall.

4. Turn the hand wheel by hand and slowly fall into the mold to observe whether there is collision or friction. If there is collision and friction, loosen the mold holder fixing screw, adjust the position of the mold holder fixing screw, and punch the mold into the hole when entering the mold. Then tighten the fixing screws of the mold base so that the upper mold can only be installed without collision or friction.

5. Slice adjustment: Turn the handwheel and push it to the high position. Observe whether there is air on the pouring surface and the model surface (high or low will affect the workpiece). If it is unqualified, loosen the butterfly screw of the adjusting gear, move the gear plate in, make the model plane face and gas become haggard, then static pressure plate, tighten the thumb screw.