laboratory tablet pressThe structure is simple, the actual operation is convenient, the size is small, the weight is light, is conducive to handling and transportation. No switching power supply can also be used when hand-operated tablet candy. In order to better integrate the new regulation of inhibiting Chinese herbal medicine agent, the equipment has improved the impact toughness, increased the transmission rate, improved the sugar and fruit strength of tabletting, expanded the filling depth and expanded the specifications and models of tabletting candy compared with the TDP type single-punch tabletting machine originally produced and manufactured by our enterprise.

The laboratory tablet press can suppress granules and small particles into annular or special-shaped sheets below 12mm, with a production capacity of 9000-15000 sheets/hour. The thickness of the sheets, the working pressure size and the tabletting candy rate can be adjusted according to the customer's regulations. The equipment appearance design is simple, exquisite, light weight, simple operation, suitable for pharmaceutical industry, food, chemical plants, electronic devices and other fields of application. Equipped with overpressure protection equipment, when the working pressure load, can be fully automatic shutdown. The equipment is equipped with electromagnetic induction braking system motor and other safety protection equipment, the operation can also be adjusted with the actual operation. Dishwashing block tablet press

　　There are certain methods for the actual operation of the tablet press in Tianhe recommend laboratory:

1. Before application, the tablet press must add grease to all oil labels, oil inlet and friction surfaces, and run empty to cover all friction surfaces with floating oil, thus increasing the service life of the equipment. Soft water salt tablet press

2. Before each shift and after each rest, several pieces of hand-operated hydraulic pressure test must be carried out. After there is no problem, the electric tabletting candy can be opened, which can prolong the service life of the die shell.

3. Stamping die storage: After cleaning up, apply a layer of food grade stainless steel grease (automobile oil and vegetable oil can be used), put it into a professional maintenance box or stamping die storage box, put it on the shelf, mark the specifications, models and specifications, and put it on the shelf for storage.

4. The laboratory tablet press will carry out particle selection of raw materials before tabletting candy to prevent flaky loose pieces, lobes, piece weight differences caused by raw materials when tabletting candy.

5. Selection of tablet type (die shell): Proper selection of tablet type is the * step for the success of tablet candy stamping die. For example, chewable tablets have high strength requirements and can be easily occluded. Most of them use arc-shaped X-ray films. If film coating is necessary, shallow concave type can be selected. Because there is no adhesive and lubricating liquid in the raw materials of Chinese medicine pills, it is stipulated that the working pressure should be large when tableting candy, and the tablet type should be shallow concave. For large sugar flakes, the design of the flakes should be shallow concave or plan view. The middle die can be made of carbon steel or hard aluminum alloy. Deep concave sheet type stamping die is very easy to destroy, try to avoid selection.

6. When disassembling and assembling the upper stamping die, the upper stamping die can be successfully removed by clamping the die shell with large pliers (in order to avoid damage caused by the large pliers encountering the pedestal, small wood can be placed on the large pliers), shaking the rocker with one hand and holding the large pliers with the other hand.

7. When installing the upper stamping die, if it directly contacts the middle die, it is very likely that the upper stamping die will be actually operated. At this time, a piece of wood can be placed on the table top, and then the rocker can be shaken!

8. After the daily application, the remaining powder should be removed and the equipment should be wiped clean. If it is stopped for a long time, the stamping die must be removed and the friction surface of the equipment must be removed. The work surface shall be cleaned, coated with anti-rust agent, and covered with anti-fouling clothing; the stamping die shall be washed and soaked into oil for storage.

The above is Shanghai Tianhe Pharmaceutical Machinery Co., Ltd., small make up for you to collect the content, if necessary, please contact us.