three-layer tablet pressIt is a combination of electric and manual models. The machine has a simple structure and strong working efficiency. It is suitable for pressing powder and granular materials into Western medicine tablets, Chinese medicine tablets, disinfection tablets, Kou Jue tablets, sugar tablets, and special-shaped tablets., Milk tablets and other tablets of different shapes. Suitable for pharmaceutical, chemical, universities, hospitals and other industries production and experimental use. _Multifunctional Tablet Press_Catalyst Tablet Press_High Speed Tablet Press_Disinfectant Tablet Press_Tablet Press
　　

three-layer tablet pressEasy to use, easy to repair, small size, light weight, the surface of the produced tablets is smooth, no cracks, uniform weight, the tablets do not stick to the mold, the mold has a long use time, and the tablets can be packaged and stored without polishing, thereby Improve production efficiency, reduce production costs, and increase output. _Multifunctional Tablet Press_Catalyst Tablet Press_High Speed Tablet Press_Disinfectant Tablet Press_Tablet Press

three-layer tablet pressOperation skills:
1,three-layer tablet pressBefore use, all oil cups, oil holes and friction surfaces must be added with lubricating oil, and the car should be run empty to make each friction surface covered with oil film to extend the service life of the machine.
21. Before each shift and after each shift adjustment, the pressure test must be performed with empty machine. If there is no problem, the electric tablet can be turned on, which can prolong the service life of the mold.
3Selection of sheet type (mold):three-layer tablet pressThe upper and lower working end faces of the die form the surface shape of the tablet, and the diameter of the middle die is the diameter of the tablet. The correct choice of sheet type is the first step to the success of the die. For example, chewable tablets have high requirements on hardness and can be chewed conveniently. Most of them are flat tablets of hypotenuse type. If film coating is required, shallow concave can be selected. Deep concave die is easy to damage, as little as possible.
4When replacing the mold, if the middle mold cannot go down, the middle mold can be gently knocked down with a stick of the same size as the upper mold.
5, inthree-layer tablet pressThe quality of tablets (weight, hardness, surface finish, etc.) must be checked frequently during tabletting and adjusted in time.
6If the material with large content of mineral and plant fiber, large diameter and poor viscosity is pressed, low-speed tabletting should be adopted. High speed generally does not exceed25Turn/Points. On the contrary, if the compacting viscosity, good fluidity, small chip diameter, easy to form particles, you can choose a higher speed.
7,three-layer tablet pressMold preservation method: after cleaning, coated with a layer of food grade lubricating oil (oil, edible oil can be), put into a special protective box or die storage box, placed on the rack, should be marked with specifications and dimensions, stored on the rack.
8,three-layer tablet pressWhen the tabletting room is operated or not operated, it is closed with plexiglass to prevent pollution.
9, every daythree-layer tablet pressAfter use, the remaining powder particles should be taken out and all parts of the machine should be cleaned. If it is stopped for a long time, the die must be removed and the friction surface of the machine must be removed. The working surface shall be cleaned, coated with anti-rust oil, and covered with dust-proof clothing; the stamping die shall be cleaned and immersed in oil for preservation.