Home
Products
Preparation Equipment
Processing Equipment
Packaging Equipment
Auxiliary Equipment
Laboratory Equipment
Bottled production line
News
Company Information
Industry Information
Exhibition Information
Sales Network
Partners
International sales network
About Tianhe
Company Profile
Enterprise culture
Qualification Honor
Contact Us
Online message
Language
简体中文
English
Design requirements for tablet presses
In the film output mode, single-sided film output, double-sided tape output, single-sided film output and double-sided tape output are required, which requires the design and modification of the output structure of the tablet press to meet different needs.
2021
12-08
How to adjust the tablet dosage of tablet press?
The shape of tablets compressed by the tablet press is mostly oblate at first, and then develops into shallow arcs and deep arcs on both sides, which is for the needs of coating. With the development of special tablet presses, a variety of tablets such as oval, triangular, rectangular, square, diamond, and round have been produced. Otherwise, with the continuous development of preparations, due to the requirements of compound preparations and sustained-release preparations, Special tablets such as double-layer, three-layer, and core-coated tablets have been produced.
11-22
The die of the tablet press has excellent performance and is widely used.
The tablet press mold has the characteristics of high hardness, good toughness, high precision and gloss, and long service life. Compared with ordinary molds, the extruded samples are more uniform, with high surface finish and no burrs.
11-08
What are the types of die for tablet press?
Tablet is a common dosage form in pharmaceutical preparations. The die of tablet press is an indispensable accessory for the commonly used tablet equipment. It is also very important to choose a suitable punching machine after the tablet press is purchased. In many daily tablet pharmaceutical factories, the purchased tablet press cannot be used normally due to improper selection of punches. Therefore, new CAD/CAM technology is adopted, advanced alloy steel, excellent heat treatment technology and scientific detection methods are used to produce various tablet press stamping dies. There are many kinds of stamping dies, but we can distinguish them according to different equipment, materials, standards and shapes.
11-04
Analysis of the structure and scope of application of tablet press equipment
The early tablet press consisted of a pair of dies with the punch moving up and down to confine the granular material into a thin sheet, and was called a single punch tablet press, which would be developed into an electric flower basket tablet press in the future. The working principle of these two tablet presses is still one-way tablet compression based on manual compression, I .e. the downward stroke is fixed during tablet compression, and only the upward stroke moves to pressurize. Due to the inconsistent upper and lower forces, this tablet compression method causes uneven internal density of the tablet and is prone to cracking and other problems.
10-08
Professional service team answers