Soft water salt tablet pressIt is a double-pressure automatic rotary continuous tableting machine that presses granular materials into tablets. It is mainly used for tablet production in the pharmaceutical industry and chemical, food, electronics and other industrial sectors. The outer shell is fully hexagonal closed, and the material is stainless steel. The inner table is stainless steel to maintain surface gloss and prevent cross-contamination. It meets GMP requirements. The doors and windows with transparent glass can clearly observe the tableting state, and the side panels can be fully opened, it is convenient for internal cleaning and maintenance. The controller and operating parts are arranged reasonably. The electric speed regulation adopts frequency conversion speed regulation device, which is convenient to operate, stable to rotate, safe and accurate. It is equipped with overload protection device. When the pressure is overloaded, it can automatically stop.

The mechanical and electronic are touch buttons and screen display. The transmission system is a machine sealed under the oil tank. It is a completely separate part, which will not produce oil pollution, and make the transmission parts penetrate into the oil pool, which is easy to dissipate heat and wear resistance. The machine is equipped with vacuum The dust collection device can absorb and remove the dust flying in the pressing room. Easy-to-use parts such as crawler, feeder, hopper, transmission worm, powder meter adopt general structure, which has been standardized, generalized and serialized.

The structure and principle of soft water salt tablet press machine:

1. Structure and performance characteristics.

2. The variable frequency speed regulating motor is used to drive the worm and worm gear through synchronous belt wheels to rotate the turntable. The turntable rotates to drive 29 stamping dies to rotate clockwise. Each die is fed through upper and lower guide rails and pressing wheels., Filling, tabletting and pressing processes.

3. The pressure, filling, plate thickness and speed of the machine can be adjusted. All adjustment handwheels are on the front of the machine. There are instructions on the operation panel. The operation is simple and the maintenance is convenient.

4. The driving development mechanism of the soft water salt tablet press can be completely isolated from the pressing room. In order to ensure that the tablets meet GMP requirements, a harmless and non-corrosive stainless steel plate is used in the tablet pressing room to isolate it from other important students. Different sealing system devices are provided around to prevent interference pollution with external factors.

5. The upper pressure wheel is equipped with a pressure relief device. The pressure of the pressure relief device can be adjusted. When the working pressure of the punch rod exceeds the preset pressure, the pressure is relieved by the compression of the spring, and the buzzer sends out an acousto-optic signal to stop immediately. Prevent damage to parts.

6, the use of closed oil immersion turbine worm drive, extend the service life of the turbine worm drive.

7. The upper guide rail, transmission, worm, hopper, feeder, filling rail and other spare parts enterprises are all in common with the soft water salt tablet press.

8. The key available for both the side panel and the rear side panel can be opened, making the repair and maintenance of the machine easier and more convenient.