Soft water salt tablet pressWidely used in all kinds of social education research institutes, enterprises for research and development design part and a small pharmaceutical factory, health care products factory and other types of different customers, common tablet press can be divided into single-punch tablet press and multi-punch rotary tablet press.

1. The single-punch tablet press is a cam (or eccentric wheel) linkage mechanism (similar to the working principle of the punch), so that the upper and lower punches produce relative movement to the tablet; 2. The multi-punch rotary tablet press is a multi-pair The working turntable of the die on the circular device is controlled by the lifting guide fixed by the upper and lower tails.

Both equipment and machines need good shelter. Here is a brief introduction on how to maintain the soft water salt tablet press:

1. Organize regular inspection of parts, which can be carried out 1-2 times a month. The inspection work items include worm gear, worm, bearing, pressure wheel, crankshaft, upper and lower guide rails and other activities, as well as whether some enterprises rotate flexibly and wear out. If defects are found, timely and effective repair technology should be used.

2. After one use or shutdown, remove the remaining powder and brush off the remaining powder. If the machine is down for a long time, clean all the molds. The smooth surface of the machine is coated with anti-rust oil and covered with a cloth.

3. When the mold is repaired, an iron box with a cover should be placed to make all the molds enter the fuel tank and keep them clean without rust and scratches. Try to customize an iron box with various specifications to avoid use. The error is helpful to grasp the defect situation.

4, the use of the site should have regular cleaning, especially for medicine and edible tablet production and manufacturing should not have sand, dust.

5. The maintenance of the soft water salt tablet press first needs to start with the parts. Only through the safety of each part can the soft water salt tablet press be better protected.

Main features of soft water salt tablet press machine:

1. The outer cover is fully enclosed by stainless steel, and the inner table is made of stainless steel, which can keep the surface gloss, prevent cross-contamination and meet GMP requirements; 2. It is equipped with a plexiglass transparent window, which can be seen in the pressing state, and the side panel can be opened by all students, which is easy to clean and maintain inside the enterprise; 3. The controller and operating parts are arranged reasonably; 4. The frequency conversion speed regulation device is used for electric speed regulation, which is easy to operate and stable; 5. Equipped with overload protection device, automatic shutdown when pressure overload;

6. Implement electromechanical information integration, using touch keys and screen to display; 7. Try semi-automatic lubricating device and plexiglass dust-proof device at the upper end of the turntable; 8. The transmission system is sealed in the oil tank under the main engine, which is a separate component and will not pollute each other; 9. Equipped with powder suction device, which can absorb dust in the pressing room.