News

Application and performance of carbon powder tablet press

Application and performance of carbon powder tablet press

Application of carbon powder tablet press machine: this machine is the newly developed special equipment for powder molding, which is suitable for powder molding in petroleum, chemical industry, metallurgy, medicine, light industry, food, electronic industry and other departments. Changing the mold can press different shapes, such as special-shaped, annular, suitable for pressing electronic components, mothballs, catalysts and powder metallurgy products. Performance: This machine is a high-efficiency and rapid automatic molding equipment, which can realize continuous operation of automatic feeding, molding and sheet production. The maximum production capacity is 12000 blocks/hour. The rotating speed of the working disc can realize stepless speed regulation. The speed is selected according to the fluidity change of the material, and the blank quality is easy to obtain the best.

2013

05-27

What if the die of the tablet press is stuck?

What if the die of the tablet press is stuck?

The reason why the die of the tablet press is stuck and the treatment method: stick punching refers to the adhesion of fine powder on the surface of the tablet by the punch and the die during tablet pressing, resulting in uneven and concave marks on the surface of the tablet, and the engraving punch is more prone to stick punching. 1. The surface of the punch is damaged or the surface finish is reduced, and there may also be anti-rust oil or lubricating oil, the surface of the new die is rough or the lettering is too deep and angular. The punch can be wiped clean, replaced with substandard dies or rubbed with a trace of liquid paraffin on the surface of the lettering punch for literal lubrication. In addition, if the mechanical heat caused by sticking should check the reasons, maintenance equipment. 2. The design of engraving and punching characters is unreasonable. Replace or change the punch accordingly.

2013

05-27

Hydraulic tablet press product description

Hydraulic tablet press product description

Hydraulic tablet press product description: performance characteristics THZY50, THZY70, THZY80, THZY90, THZY100 and THZY110 tablet presses are fully automatic multi-layer tablet presses, which have the characteristics of high pressure, high precision, stable tablet pressing and reliable performance. All electrical appliances in the machine are controlled by "PLC" programming, and all actions can be controlled by time. The equipment is all imported hydraulic components manufacturing, two-way pressing, the equipment has a high powder, pressing density, high production efficiency, the key position of the dual control of mechanical and electrical. Main technical regulations

2013

05-22

CFDA strives to improve the level of drug safety supervision

CFDA strives to improve the level of drug safety supervision

On May 13, the fifth annual meeting of the Drug Information Association (DIA) with the theme of "patient care and drug safety" was held in Beijing. Yin Li, deputy director of the State Food and Drug Administration, said at the meeting: "The Chinese government attaches great importance to drug safety and established the State Food and Drug Administration in this institutional reform. The purpose is to optimize regulatory resources and strengthen system risk prevention and control., Comprehensively strengthen food and drug supervision." Yin Li pointed out that we will reform and improve the drug safety supervision mechanism, scientifically divide the central and local drug supervision powers and responsibilities, content and procedures, and form a clear power and responsibility, reasonable division of labor, and legal protection

2013

05-16

Automatic tablet press installation, commissioning and disassembly

Automatic tablet press installation, commissioning and disassembly

Installation, commissioning and disassembly of the full-automatic tablet press 1 Preparation before installation 1. The tablet press is installed on a firm wooden workbench (it can also be installed on a cement table) and fixed with three M12 anchor screws. The height of the work table to the ground is about 600mm (by hand, easy to operate). In order to facilitate disassembly and repair, there should also be a hole with a diameter of about 35mm on the wooden workbench corresponding to the position of the lower punch core rod. 2. Connect the motor to the ground wire before connecting the motor power supply to ensure safety. Remove the V-belt, turn on the motor power, and start the motor to observe whether the rotation direction of the motor is correct (motor shaft

2013

05-14

< 1...272829...32 >
Shanghai Tianhe
Shanghai Tianhe
facebook
Twitter
instagram
tiktok

Pharmaceutical machinery, pharmaceutical equipment, tablet press,rotary tablet press, high-speed tablet press

Welcome to know our products

Get more product service information

All
  • All
  • Product Management
  • News
  • Introduction
  • Enterprise outlets
  • FAQ
  • Enterprise Video
  • Enterprise Atlas
Search

Contact Us

Address: Chenjia Town, Chongming, Shanghai
Telephone:021-59431285
Fax: 021-59432024
Mailbox:info@sthpm.com 
            yaoji_tianhe@126.com

Sales Network

shanghai tianhe pharmaceutical machinery co ltd
shanghai tianhe pharmaceutical machinery co ltd
shanghai tianhe pharmaceutical machinery co ltd
shanghai tianhe pharmaceutical machinery co ltd

Logistics services | We can customize different specifications and sizes of machines according to different requirements of customers

Copyright 2024 Shanghai Tianhe Pharmaceutical Machinery Co., Ltd.

Business License
沪ICP备05015413号

Power By : www.300.cn   SEO

online message

Professional service team answers

Submit Message