News

Brief description of die installation for tablet press

Brief description of die installation for tablet press

Brief description of die installation of tablet press 1. First clean the machine and die. 2. Apply enough grease to other parts of the upper punch except the punch, and place the upper punch in the hole of the upper punch plate with the position of the keyway at the installation position of the punch die. 3. Lift the upper die a little and insert the middle die into the upper punch. (It is recommended to wrap the upper punch with plastic film before closing the middle mold to facilitate the adjustment of the gap in the following operations). 4. Align the middle punch hole, use the upper punch to introduce the middle die into the middle punch hole, tap the upper punch tail lightly to make the middle die enter the punch hole> 1/3, remove the upper punch, and punch the copper rod from the upper punch

2013

05-12

Tablet press mold effervescent tablets sticky punch solution

Tablet press mold effervescent tablets sticky punch solution

After Teflon coating, the adhesive punching solution for effervescent tablets of tablet press die has the following characteristics: 1. non-tackiness 2, heat resistance 3, sliding 4, moisture resistance 5, wear resistance 6, corrosion resistance, chemical properties, insulation, high and low temperature resistance, self-lubrication, surface non-tackiness, non-combustibility, physical properties: application of PTFE (polytetrafluoroethylene): 1. Application of polytetrafluoroethylene (PTFE) in construction 2. Application of polytetrafluoroethylene (PTFE) in anti-corrosion performance 3. Application of polytetrafluoroethylene (PTFE) in electronic and electrical fields

2013

05-02

RP200/RP300 Powder Forming Machine

RP200/RP300 Powder Forming Machine

Many pharmaceutical manufacturers in the purchase of carbon powder tablet press, do not know how to distinguish, or to buy what is better! Below by Shanghai Tianhe Pharmaceutical Machinery Co., Ltd. for you to introduce my factory production of RP200/RP300 powder molding machine, you are welcome to inquire! RP200/RP300 rotary powder forming machine is a new product successfully developed on the basis of digesting and absorbing similar models at home and abroad, combined with the company's rich experience in tablet press manufacturing. It is widely used in electronics, ceramics, magnetic materials and other industries to press all kinds of powder materials. 1. Metal components: no

2013

04-23

Cemented carbide tablet press dies and dies

Cemented carbide tablet press dies and dies

We understand that often you have special requirements and to meet them, we have special tools: Core Rod Molds These are used for products that require high surface area. Generally used in candy products. It can also be used to manufacture flat plates. In the case of carbide lined punches and dies, products with very high usage of corrosive substances or products requiring high compression forces will corrode and die rings will be formed very quickly. To avoid this wear and increase the life of the tool, we use a very hard metal, tungsten carbide in the contact area. Teflon Reminds Remaining Manufacturing Bubble of Punching Machine

2013

04-23

Types and quality requirements of tablets produced by tablet presses

Types and quality requirements of tablets produced by tablet presses

Types and quality requirements of tablets produced by tablet presses: ordinary compressed tablets, coated tablets, sugar-coated tablets, film-coated tablets, enteric-coated tablets, effervescent tablets, chewable tablets, multi-layer tablets, dispersible tablets, sublingual tablets, buccal tablets, implant tablets, solution tablets and sustained-release tablets. It is divided into raw powder tablets and extract (semi-extract) tablets. Tablets in the production and storage period should comply with the following provisions: 1. raw materials and excipients should be mixed evenly. Small doses or tablets containing toxic drugs, according to the drug's sex

2013

04-18

< 1...303132...34 >
Shanghai Tianhe
Shanghai Tianhe
facebook
Twitter
instagram
tiktok

Pharmaceutical machinery, pharmaceutical equipment, tablet press,rotary tablet press, high-speed tablet press

Welcome to know our products

Get more product service information

All
  • All
  • Product Management
  • News
  • Introduction
  • Enterprise outlets
  • FAQ
  • Enterprise Video
  • Enterprise Atlas
Search

Contact Us

Address: Chenjia Town, Chongming, Shanghai
Telephone:021-59431285
Fax: 021-59432024
Mailbox:info@sthpm.com 
            yaoji_tianhe@126.com

Sales Network

shanghai tianhe pharmaceutical machinery co ltd
shanghai tianhe pharmaceutical machinery co ltd
shanghai tianhe pharmaceutical machinery co ltd
shanghai tianhe pharmaceutical machinery co ltd

Logistics services | We can customize different specifications and sizes of machines according to different requirements of customers

Copyright 2024 Shanghai Tianhe Pharmaceutical Machinery Co., Ltd.

Business License
沪ICP备05015413号

Power By : www.300.cn   SEO

online message

Professional service team answers

Submit Message