News

Pharmaceutical industry needs to digest excess capacity as soon as possible

Pharmaceutical industry needs to digest excess capacity as soon as possible

Statistics show that the PMI of China's manufacturing industry was 50.6 in November last year, up 0.4 percentage points from October, and the index has steadily rebounded slightly in the past three months, indicating that the domestic economy has bottomed out. However, it is worth noting that the current operation of small enterprises is still not improving, and its PMI index has been below the 50% rise and fall line since April. Overcapacity in the pharmaceutical industry has begun to drag down a large number of bases, and the production of pharmaceutical products is mainly concentrated in the low-end equipment of the pharmaceutical market. In the first half of the year, the pharmaceutical industry continued to show a stabilizing trend, but the foundation for recovery was not solid, and the more important revenue, price, profit, etc.

2013

06-24

Drug packaging machine role of major enterprises need to grasp the quality

Drug packaging machine role of major enterprises need to grasp the quality

In recent years, China's packaging machinery industry has maintained an amazing speed of development, but also put forward higher requirements for the pharmaceutical packaging industry. The fierce competition of domestic and foreign packaging machinery industry has put forward new challenges to China's packaging machinery industry. Drugs are the benefit of society to alleviate the suffering of the continuation of people's lives, in any place can not have any sloppy. Drug packaging machine is an important equipment in drug production, is an important equipment related to the safety of drug transportation and storage, carrying the expectations of many patients is to make packaging carefully. Drugs are different from other commodities, transportation and storage have a lot of particularity, to ensure the most effective

2013

06-24

The basic composition of the tablet press

The basic composition of the tablet press

The tablet press is mainly composed of forced feeding system, stamping combination, film discharge system, dust collection system and programmable controller (ProgrammableLogicController,PLC) control box. Its composition and function are as follows: forced feeding system: it is composed of feeding motor, feeding worm gear reducer, universal joint, coupling, forced feeder, feeding barrel, connecting pipe, feeding platform and leveling outrigger mechanism to fill materials into die holes. Stamping combination: composed of punching plate combination, upper and lower punching, middle die, upper and lower pre-pressing wheels, upper and lower main pressing wheels, filling device, upper guide rail plate and pull-down cam

2013

06-13

Characteristics and Application of Pharmaceutical Tablet Press

Characteristics and Application of Pharmaceutical Tablet Press

The single-punch tablet press is mainly driven by the rotation of the rotating wheel to drive the operation of up and down punching, and presses the granules filled into the die hole by the powder feeder into tablets. Its main defects are large impact noise (produced by one-way pressure) and small output (about 100 pieces/min) when pressing tablets, which is only suitable for very small batch production and laboratory trial production. The multi-punch rotary tablet press is a tablet press widely used in production at present. The full-automatic high-speed rotary PLC tablet press detects the punch pressure through the pressure sensor, which is monitored and analyzed by the central control unit CPU, and adjusts the filling depth of the tablet press according to the predetermined control model to realize tablet pressing.

2013

06-08

Under what circumstances will the rotary tablet press produce dust

Under what circumstances will the rotary tablet press produce dust

Dust generated by the rotary tablet press will cause plug punching, plug punching will damage the rail guide, dust generated in the electrical cabinet will cause electrical disconnection, dust will pollute the tablet press room and is not conducive to cleaning, the wear of the middle die hole is serious, materials are wasted, etc. Therefore, the tablet press must be equipped with a dust suction device to recover materials, improve the utilization rate of materials, and also conform to GMP. Because of the feeder and the material itself, the dust falls into the middle punch plate, the gap between the lower punch rod and the lower middle plate is large, and the dust will also fall into the lower punch plate, so a dust suction device must be used to remove the dust. Production of dust: artificial feeding will easily produce dust. Ordinary dosing

2013

06-08

< 1...282930...35 >
Shanghai Tianhe
Shanghai Tianhe
facebook
Twitter
instagram
tiktok

Pharmaceutical machinery, pharmaceutical equipment, tablet press,rotary tablet press, high-speed tablet press

Welcome to know our products

Get more product service information

All
  • All
  • Product Management
  • News
  • Introduction
  • Enterprise outlets
  • FAQ
  • Enterprise Video
  • Enterprise Atlas
Search

Contact Us

Address: Chenjia Town, Chongming, Shanghai
Telephone:021-59431285
Fax: 021-59432024
Mailbox:info@sthpm.com 
            yaoji_tianhe@126.com

Sales Network

shanghai tianhe pharmaceutical machinery co ltd
shanghai tianhe pharmaceutical machinery co ltd
shanghai tianhe pharmaceutical machinery co ltd
shanghai tianhe pharmaceutical machinery co ltd

Logistics services | We can customize different specifications and sizes of machines according to different requirements of customers

Copyright 2024 Shanghai Tianhe Pharmaceutical Machinery Co., Ltd.

Business License
沪ICP备05015413号

Power By : www.300.cn   SEO

online message

Professional service team answers

Submit Message